Opening dough with a dowel is harder than it looks. From Wordnik.com. [In a Greek Village: Opening Lessons (with Recipes for Hilopites and Trahanas / Χιλοπίτες και Τραχανάς) (for Apples & Thyme)] Reference
I use a 4 foot long, 1 inch hardwood dowel from the hardware store. From Wordnik.com. [other than the mind what tools are importiant in surving and how do you use them?] Reference
The cloths are made from 1-square-meter corduroy attached to a wooden dowel which is dragged along the trail's edges. From Wordnik.com. [PhysOrg.com - latest science and technology news stories] Reference
A wooden or plastic dowel is driven into the wall. From Wordnik.com. [1. Buttons] Reference
She looked at my other purchases - feathers, dowel etc. From Wordnik.com. [catpewk Diary Entry] Reference
Make the dowel fit the spool by winding paper around it. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
A dowel or nail may be inserted in the trough for a stop. From Wordnik.com. [Handwork in Wood] Reference
The grip was a dowel of hazelwood with shallow finger grooves. From Wordnik.com. [Lord of the Isles] Reference
Joints which use grooved pins or dowel pins need not be reamed. From Wordnik.com. [1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints] Reference
This rod is a 6-in. piece of dowel, 1/4 or 5/16 in. in diameter. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
Q (Cylindrical pins, taper pins, grooved pins, dowel pins) 3. From Wordnik.com. [1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints] Reference
Boring of holes of limited depth for end grain dowels or dowel joints. From Wordnik.com. [1. Purpose and Meaning of Boring] Reference
A-1 is the distance from the working edge of the rail to the first dowel. From Wordnik.com. [Handwork in Wood] Reference
The pin may be stuck in the upper end of the dowel, D, shown in Fig. 108. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
Fig. 209 shows the top portion of a table leg and a home-made dowel gauge. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
The part to be pressed with the finger is a short length of 1/4 in. dowel. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
Then bore the holes with a dowel-bit at the intersection of the lines, Fig. 263. From Wordnik.com. [Handwork in Wood] Reference
Fig. 192 shows a completed dowel with a small groove running along its entire length. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
If you have a brace and bit, bore a hole in a base 7/8 in. thick for a 1/4 in. dowel. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
He handed the captain a piece of wire, at each end of which was a short stick of dowel. From Wordnik.com. [Captain Corelli's Mandolin]
Oversize dowel pins are driven into simple bore holes where they respond to elastic shocks. From Wordnik.com. [2. Types of Pins] Reference
A smaller hole, 1/4 in., should be made on the other side of the center for a 1/4 in. dowel. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
· The technological steps of fitting cylindrical and taper pins, grooved pins and dowel pins. From Wordnik.com. [1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints] Reference
To firmly hold a spool from twisting around upon the dowel-axle, a set-screw, S S, is needed. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
The spools of wire purchased can then be placed upon the dowel, where they will unwind evenly. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
Cylindrical pins, close-tolerance grooved pins and dowel pins can be used in joints for driving. From Wordnik.com. [3. Types of Pinned Joints] Reference
Make a 1/4 in. hole in the cover of C for the "button," G, which is a short piece of 1/4 in. dowel. From Wordnik.com. [How Two Boys Made Their Own Electrical Apparatus Containing Complete Directions for Making All Kinds of Simple Apparatus for the Study of Elementary Electricity] Reference
The best defense mechanism for a sliding glass door I've ever has to do with the old broomstick, or the dowel. From Wordnik.com. [CNN Transcript Jun 10, 2002] Reference
I know the basic principle for starting fires with a bow and wooden dowel, but I wouldn't want to have to do that. From Wordnik.com. [nessus Diary Entry] Reference
The advantage of this cradle is obvious, preventing as it does any tendency of the partly-formed dowel to slip or wobble. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
They had already boarded the dowel when the Iranian navy appeared on the scene and seized those British marines and sailors. From Wordnik.com. [CNN Transcript Apr 5, 2007] Reference
The tools used in dowelling are: Brace, countersink, dowel-rounder, twist bit, try-square, marking-awl, and the usual bench tools. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
Grooved pins are inserted according to half length reserve taper grooved dowel pins into specific locations on a 10 mm steel plate. From Wordnik.com. [1. Objectives and Subject Matters of the Practical Vocational Training in the Techniques of Making Pinned Joints] Reference
Twist drills with a roof-shaped point and a short robust shank are mainly applied for dowel bit bores in solid wood or cross grain wood. From Wordnik.com. [3. Tools] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.