I'd throw my gauntlet down, and you should give An answer to my gage in knightly sort. From LearnThat.org. [Friedrich von Schiller (1759 - 1805) German poet, playwright, historian. Source: Wilhelm Tell, Act III, Scene III]
Some old and many new applications use the advantages of thin gage laminations, both oriented and non-oriented. From Wordnik.com. [Sustainable Design Update » Blog Archive » Super Efficient Motors] Reference
Motors, generators, transformers and inductors are being designed to be more energy efficient by utilizing thin gage silicon-iron. From Wordnik.com. [Sustainable Design Update » Blog Archive » Super Efficient Motors] Reference
It is important that the pressure gage be accurate. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
Average steam pressure, gage pounds per square inch 100. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
Between these lines gage the proper width of the gains. From Wordnik.com. [Handwork in Wood] Reference
In this way the depth of the gage line can be regulated. From Wordnik.com. [Handwork in Wood] Reference
A special gage is made for gaging curved lines, Fig. 215. From Wordnik.com. [Handwork in Wood] Reference
A recording steam gage is best and makes its own readings. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
In the form shown in Fig. 112, there is also a depth gage. From Wordnik.com. [Handwork in Wood] Reference
For such purposes, what is called a surface gage was devised. From Wordnik.com. [Practical Mechanics for Boys] Reference
He was now doing better than eighty an hour as the gage showed. From Wordnik.com. [Tom Swift and His Wireless Message: or, the castaways of Earthquake island] Reference
Sitting in the audience is the best place to gage your retractions. From Wordnik.com. [Show-Stopping Aria Encored at the Met] Reference
Their sizes are indicated by a special drill gage, Fig. 220, p. 117. From Wordnik.com. [Handwork in Wood] Reference
Along the top of the table are given the gage pressures of the steam. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
You must learn that feeling is no true gage of your spiritual experience. From Wordnik.com. [Adventures in the Land of Canaan] Reference
Mark the thickness with the marking-gage all around the piece, F, 8-9-10. From Wordnik.com. [Handwork in Wood] Reference
Hayward bucket was mounted on a carriage traveling on the 18-ft. gage track. From Wordnik.com. [Concrete Construction Methods and Costs] Reference
Every boiler is fitted with a steam gage by which the pressure is indicated. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
"We gage out men by what they do," replied Mr. Randolph in a matter-of-fact tone. From Wordnik.com. [Dave Dashaway and His Hydroplane] Reference
End. First mark the width on the working face with the marking-gage, C, 1-2, Fig. 103. From Wordnik.com. [Handwork in Wood] Reference
No. 20 gage steel, usually in four or more sections, which telescope one over the other. From Wordnik.com. [Concrete Construction Methods and Costs] Reference
The mixing trough is made of heavy gage steel, well reinforced, and practically indestructible. From Wordnik.com. [Concrete Construction Methods and Costs] Reference
Therefore the cost of evaporating 1,000 pounds of water from 180° F. to steam at 100-pound gage, is. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
Set another gage to one half the thickness of the knuckle and gage on the door face the depth of the gains. From Wordnik.com. [Handwork in Wood] Reference
If all is well, mark the position of the hinges on the frame, gage and cut the gains, and fasten in the hinges. From Wordnik.com. [Handwork in Wood] Reference
With the gage, mark short lines at the points of insertion in the center of each edge, gaging from the outside faces. From Wordnik.com. [Handwork in Wood] Reference
In the test outlined previously, the feed-water temperature was 180° F. and the pressure was 100 pounds per square inch, gage. From Wordnik.com. [Engineering Bulletin No 1: Boiler and Furnace Testing] Reference
Hence it is best to neglect them entirely when setting the gage and always to measure with the rule from the head to the spur, Fig. 213. From Wordnik.com. [Handwork in Wood] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.