Its efficiency depends upon (1) the narrowness of the saw cut or "kerf," and (2) upon the force required to drive it thru the material. From Wordnik.com. [Handwork in Wood] Reference
Methodically they opened the "kerf," each face almost as smooth as though it had been sawn. From Wordnik.com. [The Rules of the Game] Reference
It cuts with great rapidity and the kerf is narrow. From Wordnik.com. [Handwork in Wood] Reference
The kerf is wider than the saw blades thickness. From Wordnik.com. [2. The Basic Construction of Sawing Tools] Reference
File guiding kerf and saw off tube in one pass, remove burrs. From Wordnik.com. [Chapter 5] Reference
A (This is to prevent them from jamming in the kerf.) 5. From Wordnik.com. [3. Recommendations for practical vocational training in the working technique of Manual Sawing] Reference
With a fine tenon or dovetail saw, cut the saw kerf as at Fig. 316. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
During sawing particles are removed by the sawing teeth in a saw kerf. From Wordnik.com. [2. The Basic Construction of Sawing Tools] Reference
Set saws make it possible for the saw blade to move freely in the kerf. From Wordnik.com. [2. The Basic Construction of Sawing Tools] Reference
The 1/4″ kerf plate is 1″ deep and glued in using a two part epoxy. From Wordnik.com. [Build Blog » Furniture from our shop] Reference
When the kerf is well started, the whole weight of the saw may be applied. From Wordnik.com. [Handwork in Wood] Reference
The cut is made on the pulling stroke, and hence the kerf can be very narrow. From Wordnik.com. [Handwork in Wood] Reference
Then as the saw is gradually lowered, the kerf will extend quite across the wood. From Wordnik.com. [Handwork in Wood] Reference
Sawing means to separate wood and wood-based materials by cutting in a thin saw kerf. From Wordnik.com. [1. The Purpose of Sawing] Reference
It removes the fibres (3b) which are cut on both sides of the kerf by the cutters (3a). From Wordnik.com. [Chapter 6] Reference
Mark the kerf outline on the workpiece surface employing suitable marking means or aids. From Wordnik.com. [10. Band Sawing Technology] Reference
All he had were handtools: gravers, tiny thin kerf saws, jewel cleavers, bruters and dops. From Wordnik.com. [Amber Room] Reference
Until the kerf is well started, the saw should be held so that the teeth just touch the wood. From Wordnik.com. [Handwork in Wood] Reference
The 4″ deep hole for the aluminum dowel is drilled thru both the wood and kerf at the same time. From Wordnik.com. [Build Blog » Furniture from our shop] Reference
The plane-bit fits into the saw-kerf K, and in grinding is easily held firmly in place by the hand. From Wordnik.com. [Handwork in Wood] Reference
Clamp workpiece in vice at web using suitable attachment and file guiding kerf at upper face (flange). From Wordnik.com. [Chapter 4] Reference
(Cutting of workpieces in a narrow saw kerf in order to divide them or to provide them with slots or cuts.) 2. From Wordnik.com. [3. Recommendations for practical vocational training in the working technique of Manual Sawing] Reference
However, if too short, it will not sufficiently break loose the cut fibres and the cutters will jam in the kerf. From Wordnik.com. [Chapter 6] Reference
Two pieces of wood are glued one on the top of the other, the required angle is transferred thereto, and the saw kerf made. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
In order to prevent the saw blades from jamming in the kerf and to avoid frictional saw blade heating, the saw blades must cut "freely". From Wordnik.com. [3. Tools] Reference
Use model 100 if your saw sports a thin kerf blade. From Wordnik.com. [Toolmonger: The Week In Tools] Reference
For a standard 1 / 8″ kerf blade you want the model 125. From Wordnik.com. [Toolmonger: The Week In Tools] Reference
The blade is reinforced on its top edge to keep the kerf straight. From Wordnik.com. [Apartment Therapy Main] Reference
Houston, fascinated, watched the kerf mark of the blade as it tore away. From Wordnik.com. [The White Desert] Reference
Make the notch, or kerf, large enough to avoid pinching your axe in it. From Wordnik.com. [Shelters, Shacks and Shanties] Reference
That makes sense, since the 40-tooth's teeth are a little larger, but so was the kerf. From Wordnik.com. [Toolmonger: The Week In Tools] Reference
This achievement delivers the first true mono c-Si kerf-free wafering for the PV industry. From Wordnik.com. [Energy News - Energy Technology - Energy Business - Energy and the Environment] Reference
"Why, then it will cut a wide kerf," said Raymond, "and so the back will follow in easily.". From Wordnik.com. [Caleb in the Country] Reference
Almandys and Figys and Datys and kerf yt in fowr partyis and do yt to bake and serve yt forth. From Wordnik.com. [The Forme of Cury A Roll of Ancient English Cookery Compiled, about A.D. 1390] Reference
Also, I did not allow for laser kerf (width of the cut) when I designed the parts plans above. From Wordnik.com. [MAKE Magazine] Reference
If you start with too narrow a kerf, or notch, before you finish you will be compelled to widen it. From Wordnik.com. [Shelters, Shacks and Shanties] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.