And yes, the word reamer also makes me giggle–I guess I’m 12, too. From Wordnik.com. [leek and mushroom quiche | smitten kitchen] Reference
The wooden reamer is great. From Wordnik.com. [Fresh Squeezed Orange Juice « Salt and Pepper.] Reference
I couldn’t get the word reamer at the moment and hence the term - ‘the wooden thing’. From Wordnik.com. [Fresh Squeezed Orange Juice « Salt and Pepper.] Reference
Proceed from the end at which you applied the reamer. From Wordnik.com. [6. The Technological Steps of Making Pinned Joints] Reference
Figure 10 Setting (checking) of reamer by setting collar. From Wordnik.com. [2. Design and types of reamers] Reference
Where do we find the nominal diameter on a taper reamer?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
The gauge of the reamer should be at least 1½ diameters. From Wordnik.com. [Scientific American Supplement, No. 832, December 12, 1891] Reference
Then, there is always the glass reamer or juice squeezer. From Wordnik.com. [Archive 2008-05-01] Reference
What is the task of the taper lead at the straight reamer?. From Wordnik.com. [3. Construction of hand reamers] Reference
I think that I still have a Clymer reamer for the Roberts. From Wordnik.com. [anyone own a 25-06?] Reference
The end of the straight reamer is tapered - the taper lead. From Wordnik.com. [3. Construction of hand reamers] Reference
Why must we never turn a reamer in anticlockwise direction?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
Reaming of the bore with a reamer according to the fit size. From Wordnik.com. [4. Fitting Works on Plane and Curved Surfaces] Reference
Otherwise, the hub must be reamed by a spiral-fluted reamer. From Wordnik.com. [6. Technological Processes for Manufacturing Feather Key Joints and Profile Shaft Joints] Reference
Why must a straight hand reamer have a relatively long lead?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
Never leave the reamer in a hole when interrupting your work. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
(This designation is indicated on the shank of the reamer.) 8K7. From Wordnik.com. [7. Indication of fits on the straight reamer] Reference
Why can we use the straight hand reamer for through holes only?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
Only the finishing reamer leads to the required surface quality. From Wordnik.com. [3. Construction of hand reamers] Reference
Why can the straight hand reamer be used only with through holes?. From Wordnik.com. [3. Construction of hand reamers] Reference
Never turn a reamer in anticlockwise direction - risk of breakage!. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
Why must the straight hand reamer have a relatively long taper lead?. From Wordnik.com. [3. Construction of hand reamers] Reference
Tapers can also be produced by the reaming technique by means of the reamer. From Wordnik.com. [6. Reaming of taper holes] Reference
Does the trainee use the reamer properly, i.e. perpendicular to the plane?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
Figure 18 Pre-machining reamers (1) roughing reamer (2) semi-finishing reamer. From Wordnik.com. [6. Reaming of taper holes] Reference
A fluted reamer will be found invaluable for enlarging them to the correct size. From Wordnik.com. [Things To Make] Reference
Figure 6 Arbor-mounted reamer (shell reamer) 1 cutting portion, 2 mounting arbor. From Wordnik.com. [2. Design and types of reamers] Reference
Why is the straight machine reamer allowed to have a relatively short taper lead?. From Wordnik.com. [3. Construction of hand reamers] Reference
For transportation cover the cutting portion of the reamer to prevent injuries. From Wordnik.com. [3. Preparation for reaming] Reference
Does the trainee observe the principle of cleaning the reamer from time to time?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
As a result, the diameter of the reamer can be determined by an external micrometer. From Wordnik.com. [6. Checking of straight reamers] Reference
One cannot infer the exact diameter of the bore from the exact diameter of the reamer. From Wordnik.com. [6. Checking of straight reamers] Reference
During this process the instructor has to explain why he handles the reamer in such a way. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
A (Because the precise guidance of the reamer is guaranteed by the machine spindle.) 7. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Reaming] Reference
Use a cylindrical or taper reamer that fits the type and size of the pin which is to be used. From Wordnik.com. [6. The Technological Steps of Making Pinned Joints] Reference
By a reamer of 8K7 a bore true to size can be made within the range of 7.990 mm and 8.005 mm. From Wordnik.com. [7. Indication of fits on the straight reamer] Reference
The tapered hole (which has a taper per unit length of 1: 50) is produced with a taper reamer. From Wordnik.com. [2. Types of Pins] Reference
Its internal taper receives the centre of the tailstock, the drill, the drill chuck or the reamer. From Wordnik.com. [2. Structure of the regular engine lathe] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.