Modern hardened steel bevel edge blades can be struck with a mallet, making them a good general purpose tool. From LearnThat.org. [yourdictionary.com]
bevel the surface. From Wordnet, Princeton University.
Verb (used with object), verb (used without object) : to bevel an edge to prevent splintering. From Dictionary.com.
If both are of the same diameter, they are called bevel gears; if of different diameters, miter gears. From Wordnik.com. [Practical Mechanics for Boys] Reference
A bevel is the portion of metal, sometimes called the lip, that will be welded to another portion of metal. From Wordnik.com. [Welder's helper Nomeclature] Reference
I think you want a Chamfer feature for the "bevel". From Wordnik.com. [All Discussion Groups: Message List - root] Reference
Areas of text can be selected, and different attributes such as bevel, color, fonts, textures, animation and text settings applied. From Wordnik.com. [News] Reference
If necessary, bevel the under side to fit the grooves. From Wordnik.com. [Handwork in Wood] Reference
These are respectivly connected with the bevel wheels. From Wordnik.com. [Scientific American Supplement, No. 344, August 5, 1882] Reference
The scion is cut with a scarf, or bevel, on one side only. From Wordnik.com. [Northern Nut Growers Association Report of the Proceedings at the Fifteenth Annual Meeting New York City, September 3, 4 and 5, 1924] Reference
Now with the bevel-square as already set, lay out the angle. From Wordnik.com. [Handwork in Wood] Reference
Set the bevel-square at the proper angle for a dovetail, Fig. 250. From Wordnik.com. [Handwork in Wood] Reference
For ordinary work, the bevel is correctly ground to an angle of about 20°. From Wordnik.com. [Handwork in Wood] Reference
The whetting, of course, is the reverse of that on the outside bevel gouge. From Wordnik.com. [Handwork in Wood] Reference
On the 8-1/2×3-1/2×1/4-inch pieces of wood, cut a bevel a quarter of an inch wide. From Wordnik.com. [Construction Work for Rural and Elementary Schools] Reference
The lower angle of the cutter makes it necessary that the bevel be on the upper side. From Wordnik.com. [Handwork in Wood] Reference
Hold the chisel on the bevel and cut out a small piece to form a channel at the gauge line. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
Otherwise, to give clearance, the bevel would have to be made so long and so thin as to be weak. From Wordnik.com. [Handwork in Wood] Reference
The gouge that is commonly used for cutting concave outlines on end grain, is the inside bevel gouge. From Wordnik.com. [Handwork in Wood] Reference
Fig. 91 indicates the change in the grain of the wood, and the adjustable joiner's bevel is also shown. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
This will give the correct angle for the dovetails, and it may then be transferred to the joiners 'bevel. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
The transmission was supplied by steel tubes with universal cross joints through the medium of bevel gears. From Wordnik.com. [British Airships, Past, Present, and Future] Reference
Often they are cut off at a bevel, drilled and screwed directly to the shield with brass round headed screws. From Wordnik.com. [Home Taxidermy for Pleasure and Profit A Guide for Those Who Wish to Prepare and Mount Animals, Birds, Fish, Reptiles, etc., for Home, Den, or Office Decoration] Reference
Then the concave side is rubbed on the round edge of the slipstone, care being taken to avoid putting a bevel on it. From Wordnik.com. [Handwork in Wood] Reference
By putting the bevel up, the angle between the wood and the cutter is maintained practically as in the smooth-plane. From Wordnik.com. [Handwork in Wood] Reference
By means of a bevel pinion rotation is communicated to the wheel D, which is of solid metal and carries a T-slot, C. From Wordnik.com. [On Laboratory Arts] Reference
Stop chamfers are pared best with a chisel, Fig. 275, held according to convenience either flat side or bevel side up. From Wordnik.com. [Handwork in Wood] Reference
It differs from a bevel in that a bevel inclines all the way to the next arris, while a chamfer makes a new arris, Fig. 271. From Wordnik.com. [Handwork in Wood] Reference
As all angles are not obtainable by the square or bevel, a protractor is a most desirable addition to the stock of tools. From Wordnik.com. [Practical Mechanics for Boys] Reference
Mr. Jones's method of sharpening is to hone the knife flat on the surface next the scion and with a bevel on the upper edge. From Wordnik.com. [Northern Nut Growers Association Report of the Proceedings at the Fifteenth Annual Meeting New York City, September 3, 4 and 5, 1924] Reference
When he puts a child's initials on a spoon, he does it by hand with a pick-knife, creating an immaculate bevel on the letters. From Wordnik.com. [A life less ordinary: Tobias Jones] Reference
To do this cut out the board by the outline on it with a short bevel on the back and the other side the full shape of the fish. From Wordnik.com. [Home Taxidermy for Pleasure and Profit A Guide for Those Who Wish to Prepare and Mount Animals, Birds, Fish, Reptiles, etc., for Home, Den, or Office Decoration] Reference
A and C B upwards as at 1, and on to this drawing (1), set out the dovetail according to your own idea of length, width and bevel. From Wordnik.com. [Woodwork Joints How they are Set Out, How Made and Where Used.] Reference
But most new hoes are sold without even a proper bevel ground into the blade, much less with an edge that has been carefully honed. From Wordnik.com. [Organic Gardener's Composting] Reference
For ordinary work a square edge finish does well enough but for fine face work a tongue and groove or bevel edge finish is preferable. From Wordnik.com. [Concrete Construction Methods and Costs] Reference
Frequently the lapidary bevels the edge so as to bring the line of junction between real and false material at the sharp edge of the bevel. From Wordnik.com. [A Text-Book of Precious Stones for Jewelers and the Gem-Loving Public] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.