In that case the bore should be countersunk slightly. From Wordnik.com. [5. The Technological Process of Drilling] Reference
Spot-facing of bore holes for countersunk-head rivets. From Wordnik.com. [9. Purpose and application of counterboring/countersinking] Reference
Clamps are screwed to disc with countersunk head screws. From Wordnik.com. [Chapter 5] Reference
(TB = 20.5 mm) diameter of counterbored/countersunk hole. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Thread Cutting] Reference
With parquet elements - 50 mm long countersunk head nails. From Wordnik.com. [4. Advice for and Rules with Making Parquet Floors] Reference
Cheese head screws are countersunk with a piloted counterbore. From Wordnik.com. [9. The Technological Steps of Making Threaded Joints] Reference
They appeared to be countersunk into the ceiling and the floor. From Wordnik.com. [Roger MacBride]
Anybody know the Spanish words for, countersink and countersunk?. From Wordnik.com. [Countersink] Reference
With thinner parquet floor - 40 mm long countersunk head nails. From Wordnik.com. [4. Advice for and Rules with Making Parquet Floors] Reference
For nailing surfaced boards countersunk head nails should be used. From Wordnik.com. [3. Nailing of Surfaced Boards] Reference
After boring, the holes may be slightly countersunk in order to insure. From Wordnik.com. [Handwork in Wood] Reference
What countersink do you use to prepare countersunk-head riveted joints?. From Wordnik.com. [6. Technological process of riveting] Reference
The trainees will use pre-fabricated countersunk rivets of steel (4 mm). From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
How must the countersinking diameter be for a 4 mm countersunk-head rivet?. From Wordnik.com. [6. Technological process of riveting] Reference
Oval head countersunk wood screws are used for the fastening of mountings. From Wordnik.com. [2. Tools and Fasteners/Joining Elements for Nailing and Screwing] Reference
Three steel sheets are firmly joined by countersunk-head rivets in one row. From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
The trainees use button-head rivets of 4 mm and countersunk rivets of steel. From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
All screws in the top of the bench are countersunk 1/8 inch below the surface. From Wordnik.com. [Things To Make] Reference
With 22 mm thick parquet floor - 45 mm or 50 mm long countersunk head nails. From Wordnik.com. [4. Advice for and Rules with Making Parquet Floors] Reference
Does the diameter of the countersunk hole comply with the exact tabular value?. From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
Does the trainee hammer the countersunk head cleanly into the countersunk hole?. From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
What is the diameter of the countersunk hole for a countersunk-head rivet of 4 mm?. From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
For countersunk-head riveting, a surface plate or anvil can be used as rivet support. From Wordnik.com. [4. Tools and auxiliary means for riveting] Reference
A container is made of 8 mm plate sections, the joints are made with countersunk screws. From Wordnik.com. [1. Objectives and Contents of the Practical Training in the Techniques of Making Threaded Joints] Reference
What kind of a countersink do we need in order to prepare countersunk-head riveted joints?. From Wordnik.com. [1. Objectives and contents of the practical vocational training in the working technique of Riveting] Reference
Then he saw beside it a lock, countersunk into the melamine so that it would not protrude. From Wordnik.com. [The Kaisho]
These pieces are glued and drawn together by the bolts, the heads of which are countersunk. From Wordnik.com. [Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910 Federal Investigations of Mine Accidents, Structural Materials and Fuels. Paper No. 1171] Reference
Did he set the correct rotational speed, and is the diameter of the countersunk hole correct?. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Thread Cutting] Reference
(Spot-facing of holes which will be reamed or into which countersunk screws will be fitted.) 20. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working techniques of Drilling, Countersinking and Counterboring] Reference
With countersunk-head rivetings, the rivet head can be driven into the countersinking immediately. From Wordnik.com. [6. Technological process of riveting] Reference
(Through holes must be countersunk on both sides with a 60° countersink to the nominal diameter.) 16. From Wordnik.com. [1. Objectives and contents of practical vocational training in the working technique of Manual Thread Cutting] Reference
The lower side of the base (J) should be countersunk, as at M, so the head of the nut will not project. From Wordnik.com. [Electricity for Boys] Reference
This is an oblong box, provided with a countersunk lid, and usually carved from a single piece of wood. From Wordnik.com. [A Study of Pueblo Architecture: Tusayan and Cibola Eighth Annual Report of the Bureau of Ethnology to the Secretary of the Smithsonian Institution, 1886-1887, Government Printing Office, Washington, 1891, pages 3-228] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.