A cross-sectional slice. From Wordnet, Princeton University.
This cross-sectional view shows how seeds are planted. From Wordnik.com. [1. The jab-seeder a tool for manual seeding] Reference
The conductors may differ by one cross-sectional step. From Wordnik.com. [3. Making Detachable Electrical Joints (Connectors)] Reference
The cross-sectional area of the conduit is 434 sq. cm. From Wordnik.com. [Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910 Federal Investigations of Mine Accidents, Structural Materials and Fuels. Paper No. 1171] Reference
(The conductors may differ by one cross-sectional step.). From Wordnik.com. [3. Connection of Cables and Lines for Fixed Laying to Electrical Equipment] Reference
Determine the required cross-sectional area of the line. From Wordnik.com. [4. Electrical Energy] Reference
The total cross-sectional area of the tubes is 137 sq. cm. From Wordnik.com. [Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910 Federal Investigations of Mine Accidents, Structural Materials and Fuels. Paper No. 1171] Reference
A cross-sectional analysis for 1948-96 yielded similar results. From Wordnik.com. [Chapter 8] Reference
Av cross-sectional area of venturi contractor ( "bottleneck") m², mm². From Wordnik.com. [Chapter 15] Reference
· Rerod strength is approximately additive according to cross-sectional area. From Wordnik.com. [Chapter 7] Reference
All sizes of conduit have the same cross-sectional form -- the cross-section of the. From Wordnik.com. [Concrete Construction Methods and Costs] Reference
The cross-sectional dimension of the venturi mixer should be equal to that of the manifold. From Wordnik.com. [6. The Gas Otto Engine] Reference
A maximum of three copper conductors differing in up to two cross-sectional steps can be connected. From Wordnik.com. [3. Making Detachable Electrical Joints (Connectors)] Reference
The extent to which it serves to increase the draught depends on its length and cross-sectional area. From Wordnik.com. [3. Technical and Production Information] Reference
A maximum of two aluminium conductors differing in up to two cross-sectional steps can be connected. From Wordnik.com. [3. Making Detachable Electrical Joints (Connectors)] Reference
Once the dimensions of a drain have been chosen, the cross-sectional area can be calculated from them. From Wordnik.com. [Chapter 8] Reference
Then plan for the dimensions of the drain to have the same cross-sectional area as the standard cross-section design. From Wordnik.com. [Chapter 8] Reference
R = the hydraulic radius of the drain cross-section (m); to calculate this, divide the cross-sectional area by the. From Wordnik.com. [Chapter 8] Reference
The cross-sectional area of the water in the canal should be at least 8 times the cross-sectional area of the orifice. From Wordnik.com. [1.1 The role and purpose of irrigation] Reference
From an energy balance for a tube flow² at two different cross-sectional areas (1 and 2) the velocity can be calculated. From Wordnik.com. [5. The Gas Diesel Engine] Reference
Calculate the resistance and conductance of a copper wire having a length of 175 m and a cross-sectional areas of 2,5 mm2. From Wordnik.com. [2. Fundamental Quantities of Electrical Engineering] Reference
Always let the edges of one cross-grained face (cross-sectional area) of all boards end with the edges of an outer pile strip. From Wordnik.com. [Chapter 4] Reference
In indirect measurement, the discharge at a known cross-sectional area A is determined via the mean Dow velocity vm as follows. From Wordnik.com. [1. Hydrological bases] Reference
The cross-sectional area of the mixing device should in no case be smaller than the respective area of the engine inlet manifold. From Wordnik.com. [5. The Gas Diesel Engine] Reference
Depth and cross-sectional shape can also be important but can only be effectively dealt with in commercially manufactured screens. From Wordnik.com. [Chapter 6] Reference
When designating the line length by 1 and the line cross-sectional area by A, then the resistance R is proportional to 1/A, hence. From Wordnik.com. [2. Fundamental Quantities of Electrical Engineering] Reference
Determine the mean intake velocity c; (in m/s) of the venturi mixer using the channel's cross-sectional area Ai (in m²), see Equ. From Wordnik.com. [6. The Gas Otto Engine] Reference
For most concrete work, including everything discussed in this manual, rerod should take up 0.5% to 1% of the cross-sectional area. From Wordnik.com. [Chapter 7] Reference
Visually check and compare the course of the longitudinal edges of the boards and of the annual rings (at the cross-sectional areas). From Wordnik.com. [Chapter 5] Reference
Pass out and discuss cross-sectional drawings, making sure that everyone understands them and how they differ from the previous handouts. From Wordnik.com. [Chapter 10] Reference
LearnThatWord and the Open Dictionary of English are programs by LearnThat Foundation, a 501(c)3 nonprofit.
Questions? Feedback? We want to hear from you!
Email us
or click here for instant support.
Copyright © 2005 and after - LearnThat Foundation. Patents pending.